lcd driver

lcd driver

usr/99-calibration.conf-28

@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "3770 171 239 3892"
+        Option  "SwapAxes"      "1"
+EndSection

usr/99-calibration.conf-32

@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "115 3700 3865 155"
+        Option  "SwapAxes"      "1"
+EndSection

usr/99-calibration.conf-35

@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "3936 227 268 3880"
+        Option  "SwapAxes"      "1"
+EndSection

usr/99-calibration.conf-397

@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "3865 158 289 3873"
+        Option  "SwapAxes"      "1"
+EndSection

usr/99-calibration.conf-43

@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "535 3860 254 3883"
+        Option  "SwapAxes"      "0"
+EndSection

usr/99-calibration.conf-5

@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "140 3951 261 3998"
+        Option  "SwapAxes"      "0"
+EndSection

usr/99-fbturbo.conf

@@ -0,0 +1,16 @@
+# This is a minimal sample config file, which can be copied to
+# /etc/X11/xorg.conf in order to make the Xorg server pick up
+# and load xf86-video-fbturbo driver installed in the system.
+#
+# When troubleshooting, check /var/log/Xorg.0.log for the debugging
+# output and error messages.
+# Run "man fbturbo" to get additional information about the extra
+# configuration options for tuning the driver.
+
+Section "Device"
+        Identifier      "Allwinner A10/A13/A20 FBDEV"
+        Driver          "fbturbo"
+        Option          "fbdev" "/dev/fb1"
+
+        Option          "SwapbuffersWait" "true"
+EndSection

usr/99-fbturbo.conf-HDMI

@@ -0,0 +1,16 @@
+# This is a minimal sample config file, which can be copied to
+# /etc/X11/xorg.conf in order to make the Xorg server pick up
+# and load xf86-video-fbturbo driver installed in the system.
+#
+# When troubleshooting, check /var/log/Xorg.0.log for the debugging
+# output and error messages.
+# Run "man fbturbo" to get additional information about the extra
+# configuration options for tuning the driver.
+
+Section "Device"
+        Identifier      "Allwinner A10/A13/A20 FBDEV"
+        Driver          "fbturbo"
+        Option          "fbdev" "/dev/fb0"
+
+        Option          "SwapbuffersWait" "true"
+EndSection

usr/cmdline.txt

@@ -0,0 +1 @@
+dwc_otg.lpm_enable=0 console=tty1 console=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait fbcon=map:10 fbcon=font:ProFont6x11 logo.nologo

usr/inittab

@@ -0,0 +1,72 @@
+# /etc/inittab: init(8) configuration.
+# $Id: inittab,v 1.91 2002/01/25 13:35:21 miquels Exp $
+
+# The default runlevel.
+id:2:initdefault:
+
+# Boot-time system configuration/initialization script.
+# This is run first except when booting in emergency (-b) mode.
+si::sysinit:/etc/init.d/rcS
+
+# What to do in single-user mode.
+~~:S:wait:/sbin/sulogin
+
+# /etc/init.d executes the S and K scripts upon change
+# of runlevel.
+#
+# Runlevel 0 is halt.
+# Runlevel 1 is single-user.
+# Runlevels 2-5 are multi-user.
+# Runlevel 6 is reboot.
+
+l0:0:wait:/etc/init.d/rc 0
+l1:1:wait:/etc/init.d/rc 1
+l2:2:wait:/etc/init.d/rc 2
+l3:3:wait:/etc/init.d/rc 3
+l4:4:wait:/etc/init.d/rc 4
+l5:5:wait:/etc/init.d/rc 5
+l6:6:wait:/etc/init.d/rc 6
+# Normally not reached, but fallthrough in case of emergency.
+z6:6:respawn:/sbin/sulogin
+
+# What to do when CTRL-ALT-DEL is pressed.
+ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now
+
+# Action on special keypress (ALT-UpArrow).
+#kb::kbrequest:/bin/echo "Keyboard Request--edit /etc/inittab to let this work."
+
+# What to do when the power fails/returns.
+pf::powerwait:/etc/init.d/powerfail start
+pn::powerfailnow:/etc/init.d/powerfail now
+po::powerokwait:/etc/init.d/powerfail stop
+
+# /sbin/getty invocations for the runlevels.
+#
+# The "id" field MUST be the same as the last
+# characters of the device (after "tty").
+#
+# Format:
+#  <id>:<runlevels>:<action>:<process>
+#
+# Note that on most Debian systems tty7 is used by the X Window System,
+# so if you want to add more getty's go ahead but skip tty7 if you run X.
+#
+1:2345:respawn:/sbin/getty --noclear 38400 tty1 
+2:23:respawn:/sbin/getty 38400 tty2
+3:23:respawn:/sbin/getty 38400 tty3
+4:23:respawn:/sbin/getty 38400 tty4
+5:23:respawn:/sbin/getty 38400 tty5
+6:23:respawn:/sbin/getty 38400 tty6
+
+# Example how to put a getty on a serial line (for a terminal)
+#
+#T0:23:respawn:/sbin/getty -L ttyS0 9600 vt100
+#T1:23:respawn:/sbin/getty -L ttyS1 9600 vt100
+
+# Example how to put a getty on a modem line.
+#
+#T3:23:respawn:/sbin/mgetty -x0 -s 57600 ttyS3
+
+
+#Spawn a getty on Raspberry Pi serial line
+T0:23:respawn:/sbin/getty -L ttyAMA0 115200 vt100

usr/modules-HDMI

@@ -0,0 +1,13 @@
+# /etc/modules: kernel modules to load at boot time.
+#
+# This file contains the names of kernel modules that should be loaded
+# at boot time, one per line. Lines beginning with "#" are ignored.
+# Parameters can be specified after the module name.
+
+snd-bcm2835
+i2c-bcm2708  
+i2c-dev
+
+#flexfb  width=320  height=480  regwidth=16 init=-1,0xb0,0x0,-1,0x11,-2,250,-1,0x3A,0x55,-1,0xC2,0x44,-1,0xC5,0x00,0x00,0x00,0x00,-1,0xE0,0x0F,0x1F,0x1C,0x0C,0x0F,0x08,0x48,0x98,0x37,0x0A,0x13,0x04,0x11,0x0D,0x00,-1,0xE1,0x0F,0x32,0x2E,0x0B,0x0D,0x05,0x47,0x75,0x37,0x06,0x10,0x03,0x24,0x20,0x00,-1,0xE2,0x0F,0x32,0x2E,0x0B,0x0D,0x05,0x47,0x75,0x37,0x06,0x10,0x03,0x24,0x20,0x00,-1,0x36,0x28,-1,0x11,-1,0x29,-3
+#fbtft_device debug=3 rotate=90 name=flexfb speed=16000000 gpios=reset:25,dc:24
+#ads7846_device model=7846 cs=1 gpio_pendown=17  keep_vref_on=1 swap_xy=1 pressure_max=255 x_plate_ohms=60 x_min=200 x_max=3900 y_min=200 y_max=3900