There has been a problem UTF-8 characters in the configuration file
since 2006 (!), as the length of the data to be written was mis-
calculated. We can omit the specification of the data length at all
when just passing a QByteArray object to QFile::write().
Fixes setup dialog appearing each start if one of the configured paths
in the setup dialog contains non-ASCII characters.
Closes#3348920, #3017409, #2812054.
As the interface for the "AccessibleName" property might not be available
when Qt was built without accessibility support, use the "WindowTitle"
property instead where appropriate.
Closes#3300101.
We must not process the FX mixer if we notice that currently a pattern
is frozen. Furthermore renamed some state-reading messages of the
pattern class.
Closes#3316495.
Based on the patch by Thorsten Müller provided at #3307037, I continued
the work to display nice indicators for the peak value of the last 1500
ms.
Closes#3307037.
Added tooltips to show the actual value when moving the fader handle.
This works mostly like the same feature we already have for the volume
knobs. Depending on settings the value is shown in a range between
0% to 200% or -inf/-34dBV to 6.02 dBV. Again that's the same as for the
volume knob. Value range could be adjusted easily if necessary.
Closes#3305914.
Signed-off-by: Tobias Doerffel <tobias.doerffel@gmail.com>
Testing the last two characters of the filename against "so" is
insufficient as this might cover e.g. ISO files as well. Therefore
explicitely check for ".so".
Thanks to Mikobuntu for the contribution.
Closes#3289932.
It's a very bad idea to autosave while playing as this causes severe
underrun problems. Therefore instead of autosaving, trigger a re-try
timer for 10 seconds.
Closes#3317776.
Instead of always loading the last auto-saved session (which might end
up in an endless cycle if recover.mmp is faulty or causes a crash) ask
the user whether to do so.
Instead of passing an initialized pa_cvolume structure, pass NULL as
recommended by the documentation for pa_stream_connect_playback(). This
fixes the volume erroneously being set to 100% at startup.
Thanks to Thomas Moschny for forwarding the bug report.
There were some issues with the ControllerRackView when closing it
with recent Qt versions. Issue seems to be fixed by not setting a
size constraint policy for the QMdiSubWindow.
Partially closes#3149779.
When there's no BB track but a track is added to the BB editor,
automatically create a BB track so that the user doesn't get confused
by new empty track (not even showing clickable beats).
Partially closes#3149779.
every time auto-save ran, it would change the current project to
"recover.mmp". Now it doesn't do this because Song has
guiSaveProject(), guiSaveProjectAs(), and saveProjectFile().
(the latter is used for auto-save)
(cherry picked from commit 953522f34a)
auto-save time is not configurable yet. saves "recover.mmp" to
WORKING_DIR every 60 seconds. Deletes recover.mmp on successful
close of LMMS. If recover.mmp is found upon start, it loads that
project.
(cherry picked from comit f73ccadc17)
Instead of flipping to next page when the play position marker reaches
the right edge, scroll to next page smoothly using the QTimeLine class.
Closes#3144318.
The PortAudio backend lay down broken for quite a while. However as it
offers much better realtime capabilities on Windows compared to SDL, I
started to resurrect it, removed support for PortAudio < 1.9 and fixed
various bugs and crashes.
When changing an InstrumentTrack's base note while NotePlayHandles are
active, they will send a wrong MidiNoteOff event due to the masterKey()
translation in InstrumentTrack::processOutEvent().
Therefore in NotePlayHandle remember the original base note value and
add the difference between original and current base note to the value
returned by NotePlayHandle::key(). Fixes hanging notes in MIDI-based
instruments such as ZynAddSubFX.
Furthermore some coding style improvements.
Closes#3146975.
* win64-vst:
VST support layer: fixed non-working 64 bit VST plugins
VST support layer: added 32 bit VST plugin support for Win64
Win64Toolchain: added 32 bit compiler configuration
ZynAddSubFX: use new RemotePlugin::init() method
RemotePlugin: added support for running remote process multiple times
(cherry picked from commit 65c073ec63)
There's no need to implement an own (buggy) window activation history
for InstrumentTrackWindows. Use QMdiArea::subWindowList(...) instead.
Fixes buggy keyboard focus when switching between InstrumentTrackWindows.
(cherry picked from commit c05965117c)
Added a one-window-mode which allows to have only one instrument track
window open at a time. The content of this window is replaced each time
you open a different track.
Furthermore added global reception and forwarding of key events to the
piano widget of the top-most instrument track window. This for example
enables the user to play test sounds while tweaking some effects in a
different subwindow.
(cherry picked from commit 93681760d2)
Whenever closing the sample track effects window using its own close
button and trying to open it again there was only a really small window
without functionality. Fixed this by explicitely also showing subwindow
content in showEffects().
Closes#3075205.
(cherry picked from commit 830c2cb975)
Commit 491910357b was a first try to fix
bug #3052228 but it broke InstrumentPlayHandle-driven instruments.
When losing focus now simply send NoteOff MIDI events for all keys
regardless of the state indicated by Piano::m_pressedKeys.
Closes#3052228.
(cherry picked from commit f8e73c5293)
If we lose focus, call InstrumentTrack::silenceAllNotes() after
explicitely sending NoteOff MIDI events for all keys for which presses
were recorded. In case the arpeggiator is enabled this is not
sufficient. Fixes hanging notes when switching active subwindow while
pressing keys in an instrument track window with arpeggiator enabled.
Closes#3052228.
(cherry picked from commit 2f921303eb)
Notes are always drawn on-top of each other starting from the left
to the right. However the behaviour when clicking notes was reverse,
which made it quite hard to edit notes sometimes. Now the top most
note is edited/selected/moved/resized if notes overlay.
Closes#2808603.
(cherry picked from comit 28eb7e00bf)
This is workaround for a bug in libsndfile or our libsndfile decoder
causing some OGG files to be distorted. Therefore try the OGG Vorbis
decoder first if filename extension matches "ogg".
Closes#2957937.
(cherry picked from commit 6e64bcfc42)
There's no reason to not allow changing volume and panning of step notes
in PianoRoll. Therefore simply check whether the length is not equal to
zero (which might be disabled step notes) instead of checking for length
being greater than zero.
Closes#2836799.
(cherry picked from commit 8286c1031d)
There were some bugs when pressing Ctrl while in SelectMode. Fix this
by always setting m_ctrlMode and m_editMode in keyPressEvent() when
Ctrl was pressed.
Closes#2854958 and #2836576.
(cherry picked from commit 46c20bdcbd)
We have to reset global models such as tempo, master volume etc. before
clearing the global automation patterns attached to them. Fixes bug with
persistent automation on these controls when clearing project.
Closes#3046039.
(cherry picked from commit 2614474246)
When resetting a MeterModel we also have to clear global automation
patterns attached to it. Fixes bug with persistent automation data on
e.g. time signature widget when clearing project.
(cherry picked from commit 23a3efcac0)
For an unknown reason the ControllerRackView looses focus when adding
a new controller. Fix this by explicitely calling QWidget::setFocus()
at the end of ControllerRackView::addController().
Closes#3046041.
(cherry picked from commit 676a6fbad1)
We used QObject::disconnect() the wrong way leading to multiple
connections from InstrumentTrack::instrumentChanged() to
InstrumentTrackWindow::updateInstrumentView(). This resulted in
loading times being doubled each time you loaded a preset on the same
InstrumentTrack.
Closes#2934099.
(cherry picked from commit 9acb47a7a8)
In compat code of InstrumentTrack::loadTrackSpecificSettings() also
check for nodeName being equal to ControllerConnection::classNodeName().
This avoids trying to load the non-existing instrument "connection".
In master branch this has been fixed ugly in commit 22c877d4 before,
however implement a cleaner solution which is also suitable for
backporting.
Closes#3021259.
(cherry picked from commit 65311ef2b4)
We must not set the Qt::WA_OpaquePaintEvent attribute when using a
semitransparent background image in paintEvent(). Fixes artifacts
in EffectView's shadowed border.
(cherry picked from commit d830e7f622)
The SampleTrackView did not explicitely have a SampleTrack model
attached and thus trackView::modelChanged() was not called. This way
SampleTrackView's mute and solo buttons were not connected to the
according models of the SampleTrack model. Fix this by calling
setModel() in SampleTrackView::SampleTrackView() (as done in
constructors of other track types too) and overload the
SampleTrackView::modelChanged() method.
Closes#3043836.
(cherry picked from commit 311bc92bde)
According to http://www.ladspa.org/ladspa_sdk/shared_plugins.html,
LADSPA_PATH is supposed to be delimited by colons. This patch does so,
except on Windows. On Windows we use ';' instead of ':' since colon is
a legal character for a path.
When dragging preset files into BB Editor the patterns were messed up
because simple serializing was not enabled (and thus newly created
patterns were removed again). Fix this by enabling simple serializing
mode before calling InstrumentTrack::loadSettings().
Closes#3041686.
The height of TextFloat objects was not sufficient e.g. when used as
tooltips for knobs (while changing their values). Fixed improper
geometry calculation and static values in TextFloat::paintEvent().
(cherry picked from commit db8de3450c)
Using QVector involves calls to malloc & friends which are not RT safe
and thus must not be used in AudioJack::processCallback(). Instead
allocate the required array upon initialization.
(cherry picked from commit ae7a4e4c2f13432d39b13c25b66231bdd6a1cc65)
There's been some more code that is only required if AUDIO_PORT_SUPPORT
is set. Added according #ifdefs and fixed a typo in AudioPort support
code.
(cherry picked from commit e98726ae992c77fb2dfdb6668319b5521ff8aaef)
