lilv can return the scale points in randomized order, and so the linked
models (of stereo effects wit 2 `Lv2Proc`) may have different scale
points. This would mean that the same combo enumeration value would have
different float values in linked models. This problem is fixed by
sorting the scale values.
Also, it is more natural for users if scale points are enumerated in a
numerical order.
This displays a warning dialog if the users requests unusual
buffersizes:
- buffersizes less than 32
- buffersizes which are not a (natural number) power of 2
This commit also replaces some `setGeometry` stuff by `QBoxLayout`.
This improves the way digits are calculated for display in
`Lv2ViewProc`:
- More than 2 digits are now recognized
- Minus signs are now recognized
- Tests have been added
Remove whitespace in methods and add it to the parenthesis of some statements. Remove underscores from parameter names. Remove usage of `this` pointer.
Add `auto` keyword to shorten line length in `InstrumentPlayHandle::play`.
Move `const_cast` of `NotePlayHandle` closer to the `process` method as this method is the reason that the cast is needed in the first place. One might also add a version of `nphsOfInstrumentTrack` that returns a non-const result but it seems to be a general problem of a missing clear responsibility so I keep it as is.
Remove identical calls to `InstrumentTrack::processAudioBuffer` which appear in the overridden implementations of `Instrument::play` and `Instrument::playNotes`. Instead the call to `processAudioBuffer` has been moved into `InstrumentPlayHandle::play` and `InstrumentTrack::playNote`. These two methods call the aforementioned methods of `Instrument`. Especially in the case of `InstrumentTrack::playNote` the previous implementation resulted in some unncessary "ping pong" where `InstrumentTrack` called a method on an `Instrument` which then in turn called a method on `InstrumentTrack`. And this was done in almost every instrument.
In `InstrumentTrack::playNote` an additional check was added which only calls `processAudioBuffer` if the buffer is not `nullptr`. The reason is that under certain circumstances `PlayHandle::doProcessing` calls the `play` method by explicitly passing a `nullptr` as the buffer. This behavior was added with commit 7bc97f5d5b. Because it is unknown if this was done for some side effects the code was adjusted so that it behaves identical in this case.
Move the complex implementation for `InstrumentPlayHandle::play` and `InstrumentPlayHandle::isFromTrack` into the cpp file and optimize the includes.
* fixes#6354: Sample and Hold for LFO Controller
LFO controller's "white noise" wave shape didn't respect the frequency knob at all, so
Sample-and-Hold was added to extend the functionality of the LFO Controller with this
random waveshape. The original functionallity can still be accessed by setting the
FREQ knob to minimum (0.01)
---------
Co-authored-by: Kevin Zander <veratil@gmail.com>
Co-authored-by: saker <sakertooth@gmail.com>
* Change the title for SideBarWidgets to be vertically centered related to icon and with no underlining
* Update src/gui/SideBarWidget.cpp
Co-authored-by: saker <sakertooth@gmail.com>
* Updating FileBrowser display when searching : showing matching files
* Correcting increment and removing duplicated calls
* Correcting reload tree when filter is activated
---------
Co-authored-by: saker <sakertooth@gmail.com>
* Profiler rework
* Workaround for GCC bug
* Rollback QFile removal
* Use enum instead of a plain index to describe detailed stats
* Use the GCC workaround code for all compilers to avoid redundancy
* Update and fix comments
* Implement suggestions from review
* Split AudioEngine::renderNextBuffer() into separate functions, fix old formatting
* Remove QFile include
* Revert formatting changes
* Apply suggestion from review (remove unnecessary template parameter)
* Revert more formatting changes
* Convert DetailType to enum class
* DetailType enum class improvements suggested in review
* Use std::atomic for m_detailLoad
* RAII-style profiler probes
* Apply suggestions from code review
Co-authored-by: Dominic Clark <mrdomclark@gmail.com>
* Fix namespace comment
* Improve CPU load widget precision and use floats for load computations
* Atomic m_cpuLoad
* Add custom step size support for CPULoadWidget
* Apply suggestions from review (convert the profiler probe into a nested class, other small changes)
* Do not limit stored load averages to 100%
---------
Co-authored-by: sakertooth <sakertooth@gmail.com>
Co-authored-by: Dominic Clark <mrdomclark@gmail.com>
* Replace deprecated sprintf() function
* Update microtuner-related UI (add more clues explaining how to use it)
* Simpler wording in the tooltips for "apply" buttons
* Post-merge fix of a forward declaration
* Rename Misc tab to Tuning and transposition; move Microtuner config dialog to Edit menu and make it also available from instrument tab
* Enable word wrap on "MIDI unsupported" label
* Remove forgotten new unnecessary includes
* Rename InstrumentMiscView to InstrumentTuningView in locales
* Add `ArrayVector` class template and tests
* Fix counting of failed test suites
* Support detuning and panning with Sf2 Player
* Restrict panning to supported FluidSynth versions
* Fix data array cast type
* Fix tests for Qt<5.10 and correct mistaken test
* DIsplay warning for FluidSynth < 2
* Remove unnecessary clamp
* Update include guard name
* Showing Knob value on mouse over
* Correcting minors source code issues
* Correcting double QTimer include
* Removing blank lines
* Removing space and add one
* Update src/gui/widgets/SimpleTextFloat.cpp
Co-authored-by: saker <sakertooth@gmail.com>
* Correcting QTimer
* Remove a parameter that has the default value
---------
Co-authored-by: saker <sakertooth@gmail.com>
* Add mixer channel LCD to SampleTrackView
* Increase sizes to compensate for LCD box
The DEFAULT_SETTINGS_WIDGET_WIDTH and
DEFAULT_SETTINGS_WIDGET_WIDTH_COMPACT
were both increased by +32 pixels. TRACK_OP_WIDTH
and TRACK_OP_WIDTH_COMPACT were then changed
relative to that increase.
* Use Qt layout in SampleTrackView
* Add mixer channel LCD to InstrumentTrackView
* Move LCD box to the right of the track label
* Revert changes to TRACK_OP_WIDTH and TRACK_OP_WIDTH_COMPACT
* Add Tap Tempo Feature (#6375)
Resolves#5181
* Update formatting, use namespaces, etc.
* Use Qt Designer .ui file to handle the UI
Thanks to irrenhaus for the idea
Also added a few buttons I will add functionality for
* Play metronome sound when tapped
* Improve stabilization speed by comparing differences in length between intervals
To improve the speed at which the BPM counter stabilizes at a
certain number, we now compare the differences in length between
the last two taps and the most recent two taps and reset the counter
if the threshold is passed.
I made it so that a difference of 500 ms resets the counter.
* Remove duplicate m_ui
An artifact from my battle with Git and merge conflicts..
* Format TapTempoUi header file
* Add lmms namespace in UI file
* Remove taptempo.ui XML file
Not needed
* Add LMMS_EXPORT to SamplePlayHandle
* Use std::chrono::duration<double, std::milli> for intervals
Co-authored-by: irrenhaus3 <irrenhaus3@gmail.com>
* Use alias for steady_clock
Co-authored-by: irrenhaus3 <irrenhaus3@gmail.com>
* Speed up convergence by accounting for recent intervals
This uses a combination of keeping track of a more accurate BPM,
while also using a BPM difference threshold to move towards the true BPM
more quickly.
After three taps, a "recent interval" is calculated, which is similar
to the latest interval, but less fluctuating since it accounts for
three taps instead of one. This allows for comparing between
the BPM on the display with the recent BPM more closely.
We then compare the difference in magnitude of both BPM's
with the threshold. If the threshold is passed, the counter gets reset.
* Remove semicolon from "QOBJECT;" in plugins/TapTempo/TapTempo.h
Co-authored-by: Hyunjin Song <tteu.ingog@gmail.com>
* Add newline between using alias and constructor
* Cleanup header files
* Add // namespace lmms::gui comment
* Rename header guards in plugins/TapTempo/TapTempo.h
Co-authored-by: Dalton Messmer <33463986+messmerd@users.noreply.github.com>
* Rename header guards in plugins/TapTempo/TapTempo.h
Co-authored-by: Dalton Messmer <33463986+messmerd@users.noreply.github.com>
* Rename header guards in plugins/TapTempo/TapTempoUi.h
Will merge this file with ``TapTempoView`` soon.
Co-authored-by: Dalton Messmer <33463986+messmerd@users.noreply.github.com>
* Rename header guards in plugins/TapTempo/TapTempoUi.h
Co-authored-by: Dalton Messmer <33463986+messmerd@users.noreply.github.com>
* Update plugins/TapTempo/TapTempo.h
Co-authored-by: Dalton Messmer <33463986+messmerd@users.noreply.github.com>
* Replace virtual with override in plugins/TapTempo/TapTempo.h
Co-authored-by: Dalton Messmer <33463986+messmerd@users.noreply.github.com>
* Merge UI file into TapTempoView
* Pass TapTempo* directly into constructor in plugins/TapTempo/TapTempoView.h
Co-authored-by: Dalton Messmer <33463986+messmerd@users.noreply.github.com>
* Update style in plugins/TapTempo/TapTempoView.h
Co-authored-by: Dalton Messmer <33463986+messmerd@users.noreply.github.com>
* Add parameter name for keyPressEvent function in plugins/TapTempo/TapTempoView.h
Also reorder the function declarations to match the order in the source file.
Co-authored-by: Dalton Messmer <33463986+messmerd@users.noreply.github.com>
* Remove dynamic_cast to TapTempo* in plugins/TapTempo/TapTempoView.cpp
Co-authored-by: Dalton Messmer <33463986+messmerd@users.noreply.github.com>
* Restrict C linkage to only lmms_plugin_main and plugin descriptor
Co-authored-by: Dalton Messmer <33463986+messmerd@users.noreply.github.com>
* Simplify algorithm
* Update labels when calling closeEvent
* Add reset button
* Adjust layout
* Format document
* Only allow the tap button to gain focus
* Use icon provided by LMMS
* Add sync button and adjust formatting
* Make the metronome downbeat the first beat
Also simplify code
Co-authored-by: Dalton Messmer <33463986+messmerd@users.noreply.github.com>
* Round BPM values when syncing with project tempo
Co-authored-by: Dalton Messmer <33463986+messmerd@users.noreply.github.com>
* Change Plugin::Tool to Plugin::Type::Tool
---------
Co-authored-by: Hyunjin Song <tteu.ingog@gmail.com>
Co-authored-by: Dalton Messmer <33463986+messmerd@users.noreply.github.com>
* Replace QVector with std::vector in AudioEngine
* Replace QVector with std::vector in AudioEngineWorkerThread
* Replace QVector with std::vector in AudioJack
* Replace QVector with std::vector in AutomatableModel
* Replace QVector with std::vector in AutomationClip
* Replace QVector with std::vector in AutomationEditor
* Replace QVector with std::vector in ConfigManager
* Replace QVector with std::vector in Controller
* Replace QVector with std::vector in ControllerConnection
* Replace QVector with std::vector in EffectChain
* Replace QVector with std::vector in EnvelopeAndLfoParameters
* Replace QVector with std::vector in InstrumentFunctions
* Replace QVector with std::vector in MidiClient
* Replace QVector with std::vector in Mixer
* Replace QVector with std::vector in Note
* Replace QVector with std::vector in PeakController
* Replace QVector with std::vector in PianoRoll
* Replace QVector with std::vector in PluginFactory
* Replace QVector with std::vector in RenderManager
* Replace QVector with std::vector in StepRecorder
* Replace QVector with std::vector in Track
* Replace QVector with std::vector in TrackContainer
* Replace QVector with std::vector in Song
* Adapt QVector to std::vector changes in ControllerConnectionDialog
* Phase 2: Use std::abs in panning.h
Without this, the QVector changes will make the code not compile.
* Phase 2: Replace QVector with std::vector in PeakControllerEffect
* Phase 2: Replace QVector with std::vector in AutomatableModel
* Phase 2: Replace QVector with std::vector in AutomationClip
* Phase 2: Replace QVector with std::vector in ControllerConnection
* Phase 2: Replace QVector with std::vector in EffectChain
* Phase 2: Replace QVector with std::vector in Mixer
* Phase 2: Replace QVector with std::vector in PeakController
* Phase 2: Replace QVector with std::vector in RenderManager
* Phase 2: Replace QVector with std::vector in Song
* Phase 2: Replace QVector with std::vector in StepRecorder
* Phase 2: Replace QVector with std::vector in Track
* Phase 2: Replace QVector with std::vector in TrackContainer
* Phase 2: Adapt QVector changes in EffectRackView
* Phase 2: Adapt QVector changes in AutomationClipView
* Phase 2: Adapt QVector changes in ClipView
* Phase 2: Adapt QVector changes in AutomationEditor
* Phase 2: Adapt QVector changes in PianoRoll
* Phase 2: Adapt QVector changes in TrackContainerView
* Phase 2: Adapt QVector changes in TrackContentWidget
* Phase 2: Adapt QVector changes in InstrumentTrack
* Phase 2: Adapt QVector changes in MidiClip
* Phase 2: Adapt QVector changes in SampleTrack
* Fix segmentation fault in ConfigManager::value
* Fix unintended faulty std::vector insert in AutomationClip::resolveAllIDs
* Resolve trailing whitespace in src/core/StepRecorder.cpp
Co-authored-by: Hyunjin Song <tteu.ingog@gmail.com>
* Use std::next and std::prev in EffectChain::moveUp/moveDown
* Introduce static "combineAllTracks" function in AutomationClip
* Adjust variable name in Song::automatedValuesAt
* Adjust removal of long step notes in StepRecorder::removeNotesReleasedForTooLong
* Iterate over m_chords by const reference in src/core/InstrumentFunctions.cpp
Co-authored-by: Hyunjin Song <tteu.ingog@gmail.com>
* Fix StepRecorder::removeNotesReleasedForTooLong again
* Combine the ConfigManager::value overloads using std::optional
* Revise StepRecorder::removeNotesReleasedForTooLong
* Remove redundant std::optional in ConfigManager::value
* Remove trailing whitespace in ConfigManager::value
* Fix: Prevent incorrect use of std::distance when element not found
* Chore: Remove trailing whitespace in edited files
* Only set the id attribute if the controller was found
Co-authored-by: Hyunjin Song <tteu.ingog@gmail.com>
* Remove extra indents from 84b8fe8a559855ed263b74cc582eab3655250c5f
* Fix compilation issues
* Add LMMS_ prefix for header guard in Track.h
* Undo changes made to MixerView::deleteUnusedChannels
* Simplify code to handle failure of finding tracks
Co-authored-by: Hyunjin Song <tteu.ingog@gmail.com>
* Split ternary operator into separate if statement
Co-authored-by: Hyunjin Song <tteu.ingog@gmail.com>
* Undo changes to indentation in MixerRoute
* Do general clean-up
Some of the changes made:
+ Use auto where benefical
+ Fix bug in AutomatableModel::globalAutomationValueAt (for loop should be looping over clips variable, not clipsInRange)
+ Undo out of focus whitespace changes
* Always assign to m_steps regardless if clip is found or not
Even when the clip is not found (i.e., currentClip is -1), m_steps still
gets assigned to.
* Insert at the end of tracks vector in src/core/Mixer.cpp
Co-authored-by: Dominic Clark <mrdomclark@gmail.com>
* Insert at the end of tracks vector in src/core/Mixer.cpp (2)
Co-authored-by: Dominic Clark <mrdomclark@gmail.com>
* Remove redundant template parameter
* Use std::array for zoomLevels
---------
Co-authored-by: Hyunjin Song <tteu.ingog@gmail.com>
Co-authored-by: Dominic Clark <mrdomclark@gmail.com>
Remove the temporary class `AudioDeviceSetupGroupWidget` and move its
functionality into `AudioDeviceSetupWidget`. This means to let
`AudioDeviceSetupWidget` inherit from `QGroupBox` instead of
`TabWidget`.
Adjust all inheriting classes accordingly. Adjust usages in SetupDialog.
The result should be that even the cases for `LMMS_HAVE_SOUNDIO` and
`LMMS_HAVE_SNDIO` should compile again. Although their layout might look
weird.
Adjust the dialogs of most audio driver settings dialogs by showing them
in a QGroupBox and adjusting their layouts. All dialogs now use
`QFormLayout` to layout their labels and input widgets.
Technical details
------------------
Introduce `AudioDeviceSetupGroupWidget` which is intended to
functionally replace `AudioDeviceSetupWidget` in the long run. This is
likely a temporary replacement in the sense that
`AudioDeviceSetupGroupWidget` will be renamed to
`AudioDeviceSetupWidget` once the latter has been replaced everywhere.
Both classes are very similar and the only difference is that the former
inherits from `QGroupBox` instead of `TabWidget`.
Adjust the using of AswMap so that it is now defined as a map from
`QString` to `AudioDeviceSetupGroupWidget`.
Use `QFormLayout` to layout the widgets of the setup dialogs instead of
hard coding geometries and placement.
TODOs
------
Adjust the widgets for the SoundIO and SndIo cases. These will be a bit
more effort as they are not compiled on my machine.
Adjust the plugins group to also use a QGroupBox and QCheckBoxes. This
finishes the "Performance" page and also finally enables the removal of
the local variables `XDelta` and `YDelta` as well as the lambda
`addLedCheckBox`.
Other changes
--------------
Add a TODO to some unused code for some advanced setting.
Fix layout of the main widget and the buttons widget. Remove an
erroneous ",1" after a statement.
Make the setup dialog resizable and use widgets that dynamically adjust
to the font size set by the user.
Current status of the tabs:
* General: Done
* Performance: Plugins group needs adjustments
* Audio: Individual settings dialogs need adjustments
* MIDI: Not started yet
* Paths: Done
The "Autosave" and "Buffer size" tabs have been slightly redesigned so
that the revert/reset button is next to the slider.
Technical details
------------------
Setting a fixed size has been removed from the setup dialog so that it
can be resized.
The settings widget (`settings_w`) now has a layout to which the sub
dialogs are added. This is done so that the layout sizes are propagated
upwards, i.e. all widgets along the chain now have a layout so that size
hints are determined correctly.
Instances of `TabWidget` are replaced with instances of `QGroupBox`.
Each group box has a layout to which its children, e.g. check boxes, are
added. These group boxes are then added to the layouts of their parents.
Doing so also removes the need to count how many instances have been
added and calculations on where to put the children.
Instances of `LedCheckBox` are replaced with instances of `QCheckBox`.
This is done in the new helper lambda `addCheckBox`. It's very similar
to the previously used `addLedCheckBox` but creates a `QCheckBox`
instead of a `LedCheckBox`. It returns the created `QCheckBox` as a
result. If a layout is provided the created check box is also added to
the layout before it is returned.
The helper lambda `addPathEntry` has been adjusted to create a
`QGroupBox` and to put all its children in a layout.
The helper method `labelWidget` has been adjusted to not set the font
size of the label.
The method `TabBar::addTab` had to be extended with a new default
parameter which controls if the added widget is fixed to the size of
it's parent or not. In the case of the setup dialog we do not want this.
So far the method is only used by the setup dialog and the
`LadspaBrowser` class. So once the `LadspaBrowser` has been made
resizable the default parameter can be removed again and treated as
always being set to false.
Add `QCheckBox` to the `style.css` so that it does not get a green font
due to the palette magic that's done.
Move the implementation of the Model methods into Model.cpp so that
recompiles after changes are much quicker. Make Model::
isDefaultConstructed const.
Fix a crash that occurs if the zooming or snapping model of the Song
Editor is used for automation.
The crash is caused by a failed static_cast to a Model* in
Model::parentModel(). The cast fails because in the constructor of
SongEditor the SongEditor is set as the parent of the zooming and
snapping model:
m_zoomingModel->setParent(this);
m_snappingModel->setParent(this);
This commit is rather a "band aid" fix because it only fixes the crash
by changing the static_cast to a dynamic_cast. However this means that
the name of the automation clip is initially empty.
A better solution would be to not use the Qt parent/child relationships
to implement the model hierarchies.
* Add confirm removal on mixer channels
Add confirm removal popup when the user calls the action "remove channel" on a mixer channel that is in use (receives audio from other channel or track). Set a config variable to keep track if the user don't want to be asked again. Adding a scroll on settings-general tab because there weren't enough space on the area.
* Core Mixer function channel in use
New core Mixer function to check if a given channel is in use (receives audio)
---------
Co-authored-by: Hyunjin Song <tteu.ingog@gmail.com>
Co-authored-by: saker <sakertooth@Gmail.com>
